Config = {}

-- Debugmodes
Config.Debugmode = false -- General debugging, shows what seats/beds you can sit/lay on and the direction you will be facing, also enables debugging commands. (Only shows seats nearby)
Config.DebugPoly = false -- This is not advised unless you have set your PolyZone script set to only render polys nearby, a prefeered way is to go into list.lua and set the debug on the polyzone group instead! (see gabz_atom)

-- Whether or not to use GTA's default notifiaction system, it will otherwise use mythic notify (can be changed)
Config.UseNativeNotifiactions = false

-- Teleport to the last position before getting seated when we found no way to get to the seat
Config.TeleportToLastPosWhenNoRoute = false

-- Always teleport in/out of the seat
Config.AlwaysTeleportToSeat = false
Config.AlwaysTeleportOutOfSeat = false

-- Tthe interaction and prompts distance, used for max distance the 3rd eye can see, how far the /sit command will look for entites and how close you have to be for a prompt to be showed if you use those.
Config.MaxInteractionDist = 2.0
Config.MaxPromptDist = 1.8

-- The maximum amount of tilt a object can have before it is rendered unsuitable to sit on
Config.MaxTilt = 20.0

-- These will be the default keys/buttons
Config.DefaultKeybinds = {
    GetUp = {
        Keyboard = 'X',
        PadAnalog = 'RRIGHT_INDEX'
    },

    -- Only used in the prompts system
    SitDown = {
        SitKeyboard = '',
        LayKeyboard = '',
        SitPadAnalog = 'LLEFT_INDEX',
        LayPadAnalog = 'LRIGHT_INDEX'
    }
}

-- Whether or not to add chat suggestion.
Config.AddChatSuggestions = true

-- Whether or not to use the prompt system. NOTE: this uses extra resources.
Config.UsePrompts = false

-- If true, instructions on how to get up form the seat/bed will be displayed in the top left corner of your screen
Config.ShowHelpText = true

-- Whether or not trigger an reduce stress event/export when sitting/laying down. You wil have to add a event/export yourself for this to work.
Config.ReduceStress = false

-- The targeting solution (3rd eye) to use.
-- false       = don't use any targeting solution. 
-- 'qb-target' = qb-target by BerkieBb and its many other contributors. (https://github.com/BerkieBb/qb-target)
-- 'qtarget'   = qTarget by Linden (thelindat), Noms (OfficialNoms) and its many other contributors. (https://github.com/overextended/qtarget)
-- 'ox_target' = ox_target by Linden (thelindat) and its many other contributors. (https://github.com/overextended/ox_target)
Config.Target = 'ox_target'

-- Use the coords of where the 3rd eye intersects with the object to find the closest seat. If set to false the coords of the player ped will be used instead.
Config.UseTargetingCoords = true

-- These are the icons/labels if we use a targeting solution.
Config.Targeting = {
    SitIcon = "fas fa-chair",
    LayIcon = "fas fa-bed",
    SitLabel = "Usedi se",
    LayLabel = "Ulezi se",
}

-- The localization for the notifications, chat suggestions and keymapping.
Config.Lang = {
    -- Notifications
    Notification = {
        OccupiedSit = "Ta sedez je ze zaseden!",
        OccupiedLay = "Nemores se tu ulezti!",
        NoAvailable = "Noben sedez ni prost!",
        NoFound = "Noben sedez ni bil najden!",
        NoBedFound = "Nic ni bilo najdeno da bi se lahko ulegel!",
        TooTilted = "Ta sedez je prevec obrjen!",
        CannotReachSeat = "Nemores dosezti tega sedeza!",
        CannotSitInSeat = "Nemores sedeti v tem sedezu!",
        CannotReachBed = "Nemores dosezti te klopce/postelje!",
        AlreadyAttemptingToSit = "Se ze usedas!",
        AlreadyAttemptingToLay = "Se ze ulegas!"
    },

    -- Chat Suggestions
    ChatSuggestions = {
        Sit = "Sit down on the closest seat",
        Lay = "Lay down on the closest bed/bench"
    },

    -- Key Mapping
    KeyMapping = {
        -- %s is automatically replaced with the key they need to press.
        SitDown = "Press %s to sit down",
        LayDown = "Press %s to lay down",
        GetUp = "Press %s to get up"
    },

    -- Description in Settings>Key Bindings>Fivem
    KeyBindingDesc = {
        Keyboard = {
            SitDown = "Sit - Sit Down On Seat",
            LayDown = "Sit - Lay Down On Bed/Bench",
            GetUp = "Sit - Get Up From Seat/Bed"
        },
        PadAnalog = {
            SitDown = "Sit - Sit Down On Seat - Controller",
            LayDown = "Sit - Lay Down On Bed/Bench - Controller",
            GetUp = "Sit - Get Up From Seat/Bed - Controller"
        }
    }
}

-- The diffrent sitting settings, don't touch unless you know what you are doing.
Config.SitTypes = {
    ['default'] = { -- Default settings, if non has been spesified
        skipGoStraightTask = false,
        teleportIn = false,
        teleportOut = false,
        timeout = 8,
        scenarios = {
            [1] = { name = "PROP_HUMAN_SEAT_CHAIR_MP_PLAYER", offset = vector4(0.0, 0.0, 0.0, 0.0) }
        }
        -- animation = { dict = "timetable@jimmy@mics3_ig_15@", name = "idle_a_jimmy", offset = vector4(0.0, 0.0, 0.0, 0.0), flag = 1 }
    },
    ['chair'] = {
        scenarios = {
            [1] = { name = "PROP_HUMAN_SEAT_CHAIR_MP_PLAYER" }
        }
    },
    ['chair2'] = {
        scenarios = {
            [1] = { name = "PROP_HUMAN_SEAT_CHAIR_MP_PLAYER" },
            [2] = { name = "PROP_HUMAN_SEAT_ARMCHAIR", offset = vector4(0.0, 0.05, 0.0, 0.0) }
        }
    },
    ['chair3'] = {
        scenarios = {
            [1] = { name = "PROP_HUMAN_SEAT_CHAIR_MP_PLAYER" },
            [2] = { name = "PROP_HUMAN_SEAT_ARMCHAIR", offset = vector4(0.0, 0.05, 0.0, 0.0) },
            [3] = { name = "PROP_HUMAN_SEAT_DECKCHAIR" }
        }
    },
    ['barstool'] = {
        teleportIn = true,
        scenarios = {
            [1] = { name = "PROP_HUMAN_SEAT_BAR" }
        }
    },
    ['stool'] = {
        teleportIn = true,
        scenarios = {
            [1] = { name = "PROP_HUMAN_SEAT_CHAIR_MP_PLAYER" }
        },
    },
    ['deck'] = {
        scenarios = {
            [1] = { name = "PROP_HUMAN_SEAT_DECKCHAIR" }
        }
    },
    ['sunlounger'] = {
        skipGoStraightTask = true,
        timeout = 12,
        scenarios = {
            [1] = { name = "PROP_HUMAN_SEAT_SUNLOUNGER" }
        }
    },
    ['tattoo'] = {
        animation = { dict = "misstattoo_parlour@shop_ig_4", name = "customer_loop", offset = vector4(0.0, 0.0, -0.75, 0.0) }
    },
    ['strip_watch'] = {
        scenarios = {
            [1] = { name = "PROP_HUMAN_SEAT_STRIP_WATCH" }
        }
    },
    ['diner_booth'] = {
        teleportIn = true,
        teleportOut = true,
        scenarios = {
            [1] = { name = "PROP_HUMAN_SEAT_CHAIR_MP_PLAYER" }
        }
    },
    ['laysit'] = {
        animation = { dict = "timetable@jimmy@mics3_ig_15@", name = "idle_a_jimmy", offset = vector4(0.0, 0.0, 0.0, 0.0) }
    },
    ['wall'] = {
        scenarios = {
            [1] = { name = "WORLD_HUMAN_SEAT_WALL" }
        }
    },
    ['steps'] = {
        scenarios = {
            [1] = { name = "WORLD_HUMAN_SEAT_STEPS" }
        }
    },
    ['ledge'] = {
        scenarios = {
            [1] = { name = "WORLD_HUMAN_SEAT_LEDGE" }
        }
    },
    ['director'] = {
        animation = { dict = "misscarsteal4@director_grip", name = "beginning_loop_director", offset = vector4(0.0, 0.0, -1.16, 0.0) },
        teleportOut = true
    },
}

-- The diffrent laying settings, don't touch unless you know what you are doing.
Config.LayTypes = {
    ['default'] = { -- Default settings, if non has been spesified
        animation = { dict = "misslamar1dead_body", name = "dead_idle" },
        exitAnimType = 0, -- 0 = relative to camera | 1 = to the right | 2 = to the left
        exitAnim = true
    },
    ['bed'] = {
        animation = { dict = "misslamar1dead_body", name = "dead_idle" }
    },
    ['lay'] = {
        animation = { dict = "savecouch@", name = "t_sleep_loop_couch", offset = vector4(-0.1, 0.1, -0.5, 270.0) }
    },
    ['layside'] = {
        animation = { dict = "savecouch@", name = "t_sleep_loop_couch", offset = vector4(-0.1, 0.1, -0.5, 270.0) },
        exitAnimType = 2
    },
    ['layside_reverse'] = {
        animation = { dict = "savecouch@", name = "t_sleep_loop_couch", offset = vector4(0.1, 0.1, -0.5, 90.0) },
        exitAnimType = 1
    },
    ['busstop'] = {
        animation = { dict = "savecouch@", name = "t_sleep_loop_couch", offset = vector4(0.0, 0.0, -0.5, 270.0) }
    },
    ['medical'] = {
        animation = { dict = "anim@gangops@morgue@table@", name = "body_search" }
    },
    ['tattoo'] = {
        animation = { dict = "amb@world_human_sunbathe@male@front@base", name = "base", offset = vector4(0.0, 0.0, 0.0, 180.0) },
        exitAnim = false
    }
}

-- Which preset locations that should be loaded. (gabz team mlo's are loaded by default, disable/enable those you use!)
Config.PresetLocations = {
    -- Vanilla Interiors
    coroner = true,
    lscustoms = false,
    mrpd = false,
    pacific_standard = true,
    paleto_bank = true,
    paleto_so = false,
    pdm = false,
    sandy_so = false,
    tattoo_shops = true,
    tequilala = true,
    trevors_trailer = true,
    vanilla_unicorn = false,

    -- Gabz Team Interiors
    gabz_altruists = false,
    gabz_atom = false,
    gabz_aztecas = false,
    gabz_bahama = false, -- Bahama Mamas
    gabz_ballas = false,
    gabz_bennys = false,
    gabz_catcafe = false,
    gabz_bobcat = false,
    gabz_diner = false, -- Pop's Dinner
    gabz_families = false,
    gabz_firedept = false, -- El Burro & Davis
    gabz_harmony = false,
    gabz_haters = false,
    gabz_hayes = false,
    gabz_hornys = false,
    gabz_import = false,
    gabz_lamesa_pd = false,
    gabz_lostsc = false,
    gabz_lscustoms = false, -- This is NOT mutually exclusive with the regular lscustoms, just an add-on if you have gabz-lscustoms
    gabz_marabunta = false,
    gabz_mrpd = false,
    gabz_paletocamp = false,
    gabz_ottos = false,
    gabz_pacific_standard = false, -- This is the new pacific standard from the gabz team.
    gabz_pacific_standard_old = false, -- This is the old gabz pacific standard, it's a retexure of (+ some changes to) the base game version.
    gabz_paleto_bank = false,
    gabz_paleto_so = false,
    gabz_park_ranger = false,
    gabz_pdm = false,
    gabz_pillbox = false,
    gabz_pizzeria = false,
    gabz_prison = false,
    gabz_records = false, -- Records A Studios
    gabz_sandy_so = false,
    gabz_townhall = false,
    gabz_triads = false,
    gabz_tuners = false,
    gabz_vagos = false,
    gabz_vanilla_unicorn = true,
    gabz_weedcamp = false,

    -- These are just proofs of concept.
    ledge = true,
    steps = true,
    wall = true,
}